Yangzhou Idealtek Electronics Co., Ltd.  

Product Name: Variable High Voltage Power Supply with 3kj/S Charging Rate Model NO.: CCP-(N/P)6kW-8kV Brand: Idealtek Modulation System: PWM Energy Transmission: One-way Transmission Power Supplying System: Terminal Power Distribution Equipment Voltage Regulating Mode: Frequency Modulation Type Starting Mode: Self-excited Switching Power Supply Connection Mode: Series Switching Power Supply Input Voltage: 380V Output Power: 6kw Warranty: 1 Year Output Type: Single Output Voltage: 0 ~ 8kv Output Current: 0mA ~ 750mA Output Polarity: Positive or Negative Circuit Mode: AC/DC High Frequency Conversion Working Mode: Constant Voltage / Constant Current Output Setting: 10-Turn Potentiometer Output Display: LED Protection: Ocp, Short Circuit and Load Discharging Protecti Remote Control: 0~10V / 4~20mA Analog Signal Control / RS Ports Chassis: 6u / 19-Inch Standard Chassis Trademark: iDealTeknic Transport Package: Plywood Case Specification: IGBT & HF transformer Origin: China HS Code: 85044019 Product Description CCP Series High Voltage Capacitor Charging DC Power SupplyModel:CCP-(N/P)6kW-8kVPower range: 6KWVoltage range: 0 ~ 8KVCurrent range: 0 ~ 750mA6U / 19-inch standard chassisPrecise voltage and current setting and measurement capabilitiesOCP, short circuit and load discharging protections etc.OverviewThe CCP series is high-voltage power supply specially designed for high-voltage capacitors charging application.The unique constant-current working charging mode and reverse-cutting design & protections of this series of power supply best match the requirements of capacitor charging requirements.CCP series has two configurations according to the output power: 4U chassis and 6U chassisThe 4U chassis models can achieve a maximum output power of 2KW and a maximum output voltage of 60KV.The 6U chassis model can achieve a maximum output power of 6KW and a maximum output voltage of 100KV.This series can meet the charging and testing needs of various capacitors.It is a best choice for HV laboratory testing, product testing and other HV applications.FeaturesCan be used as a HV DC power supply or as HV capacitor charging power supply.Output voltage adjustable from 0 to 100%Output power: Average charging @ 3KJ/S and the peak charging power can reach 6KW.Charging in constant current mode and switch to constant current mode till fully charged.Unique double isolated system, strong anti-interference ability.Forced air cooling, very rugged design.Optional functions0 ~ 10V analog signal control (DB50 interface <6U>) (+AC)RS communication interface (RS232 / RS485 optional) (+RC)SpecificationsInputVoltageThree-phase 380Vac (input tolerance: 10%)Frequency50Hz/60HzCurrentAs per output power.OutputPeak power6KWCharging rate3KJ / SOutput voltage adjusting range0 ~ 8KVOutput current adjusting range0A ~ 750mAOutput polarityPositive or Negative (both available)Client must choose one output polarity before ordering.Output connectionHV connector and line provided by IdealTek.Output voltage regulation precision≤0.1%Output voltage accuracy≤0.1%Line regulation≤0.5% for no load to full load at output.Load regulation≤0.5% for ±10% change in input voltage.Ripple (Vr.m.s.)≤0.5%@ rated output.Output cableHV connector and line provided by IdealTek.Efficiency≥90%Setting & DisplayOutput control mode10-turn potentiometer on front panel.Display mode41/2 LED digital displayProtection & Monitoring functionsLoad discharging protectionWhen the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.Short circuit protectionWhen a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.Over current protectionWhen the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.Noise≤65dBProtection degreeIP20Cooling methodForced air coolingWorking environment conditionsAmbient temperature10ºC~40ºCHumidity10%~90%(non-condensing)Height≤2000mStorage environment conditionsAmbient temperature-20ºC~60ºCHumidity10%~90%(non-condensing)Height≤4000mSize (W*H*D) (mm)19" sub-rack unit with 6U height and 600mm DepthWeightApprox. 45KgNote: every power supply has 48 hours full load burn-in test @ 40ºCSafety cautionThis power supply has HV output, only professional person could operate it.Please make sure of good grounding before operation.Capacitor charging power supply has low internal stored energy, please NO no-loading working.Keep power supply clean and good ventilation.HV input & output connectors or HV load no touch anything.Drawings (for reference only)6U chassis ((2KW<P≤6KW)) (RAL7035)Remote DB50 port drawing and definitionHV can be enabled only when JB1 - 3 and JB1 - 4 are closed.1AGNDAGND2 Reset/HV Inhibit Normally open, Low = Reset/Inhibit3 External Interlock +24Vdc @ open, <25mA @ closed4 External Interlock Return Return for External Interlock5 mA Test Point 0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%6 kV Test Point 0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%7 +10Vdc Reference Output +10Vdc @ 1mA8 mA Program Input 0-10Vdc = 0-100% rated output, Zin>10Mohm9 Spare10 kV Program Input 0-10Vdc = 0-100% rated output, Zin>10Mohm11 Spare12 Reserved13 Reserved14 Spare15 Power Supply Common Power Supply Ground16 Remote HV On +24Vdc @ open, <25mA @ closed, momentarilyconnect to pin 15 enable high voltage17 Spare18 HV On Indicator +24Vdc @ 25mA = HV On19 Power Supply Common Supply Ground20 +24Vdc Output +24Vdc @ 100mA, maximum21 Voltage Mode Status Open Collector, Low = Active22 Current Mode Status Open Collector, Low = Active23 Reserved24 Interlock Closed Status Open Collector, Low = Active25 Reserved26 Spare27 Spare28 Reserved29 Reserved30 Reserved31 Reserved32 System FaultOpen Collector, Low = Active33 Reserved34 Arc Open Collector, Low = Active35 Over Temp Fault Open Collector, Low = Active36 AC Fault Open Collector, Low = Active37 Spare38 Spare39 Spare40 Spare41 Spare42 Spare43 Spare44 +5Vdc Output +5Vdc @ 100mA, maximum45 +15Vdc Output +15Vdc @ 100mA, maximum46 -15Vdc Output -15Vdc @ 10mA, maximum47 RS232 TxN/A for this unit48 RS232 RxN/A for this unit49 RS232 GNDN/A for this unit50 Power Supply Common Power Supply Ground